DAG2000-4S4O is FXS and FXO hybrid gateway
DAG2000-4S4O is FXS and FXO hybrid gateway unit offers An SIP v2.0 standard gateway with 4 FXO and 4 FXS ports. These connect the PSTN fixed transmission lines to the analog phone system simultaneously. It features an SIP account with primary and secondary protocols. The unit also comes with flexible FXO port modules. In addition, the gateway offers a caller ID with multiple SIP trunks. High-end flexibility is achieved with the use of manipulative and routing rules to operate the device. The DAG2000-4S40 gateway hybrid unit delivers commendable VLAN management with data and voice control as well.
DAG2000-4S40 analog device: A user-friendly gateway for high-end transmission
The DAG2000-4S40 unit uses RJ-11 and 4FSX and 4FSO interfaces for flexibility interoperability. Other features in the device include echo cancellation, SIPv2 protocol, NAT traversal with both dynamic and static transmissions, etc. In addition, the dialling modes in the device comprise of DTMF as well as pulse. A caller ID with busy tone, current detection, and polarity reversal detection are also added.
The DAG2000's entryway unit can offer an open-standard support for SIP with IPv4 and IPv6 arrange convention bolster also. It accompanies a cabling length of up to 3 KM. With Broadsoft/Elastix accreditation, this portal offers full similarity with driving SIP-based IP communication stages and NGN/IMS frameworks.
With the DAG2000-4S4O FXS Analog VoIP unit, agreeable commotion era is acknowledgeable. In addition, the gadget works with quiet concealment component to keep the voice fresh and clear. VAD or voice action location is additionally a mark nature of this gadget which advances reverberate cancelation also. A versatile jitter cushion is likewise included in the gadget with programmable pick up control.
Other vital perspectives about the gadget:
Control supply required in the DAG2000-4S4O is 100-240V AC which keeps running at a recurrence between 50 to 60 Hz. The power utilization of the gadget is 20W. Amid utilization, the temperature required for working the gadget is set between - 10 C and 45 C. Capacity temperature when the gadget is not being used is set at - 20 C to 80 C. The DAG2000 unit is set at a mugginess level from 10% to 90% with no consolidating angles. This unit comes in measurements 242mm x 152mm x 40mm with 1 U port size. The heaviness of the gadget is 1.0 kg with CE and FCC consistence.
|Dialing Modes||Pulse and DTMF|
|Pulse Dialing||10 and 20 PPS|
|Busy Tone/No Current Detection, Polarity Reversal Detection||Yes|
|Caller ID||DTMF, Bellcore Type 1&2, ETSI, BT, NTT|
|Lifeline||Power/Network Failure Lifeline|
|Caller ID||DTMF and FSK Presentation|
|Polarity Reversal||for Call Connect/Disconnection Signaling|
|Dialing Modes||Pulse and DTMF|
|Hook Flash||Local or Relay processing|
|Temperature||(Operation):-10 ℃~ 45 ℃ (Storage): -20 ℃~80 ℃|
|Ethernet Interface||4*RJ-45 10/100 Base-Tx, RJ-45|
|Telephone interface||4FXS, 8FXS, RJ-11|
|Power Consumption (Typical):||20W|
|Input||12VDC 2A, Power Adapter|
|Call Forward on Busy||Yes|
|Call Forward on No Reply||Yes|
|Unconditional Call Forward||Yes|
|Voice and Fax|
|Codecs||G.711A/U law, G.723.1, G.729A/B|
|DTMF||Signal, RFC2833, INBAND|
|NAT Traversal||STUN, Dynamic/Static NAT|
|Echo Cancellation||G.168 with up to 128ms|
|Protocol||: SIPv2, SDP, RTP (RFC2833)|
|QoS||VLAN 802.1P/Q, DIFFServ ToS|